Sadowsky Audio | SA200 All Tube Bass Amp

THE SA200 HAS BEEN DISCONTINUED AND IS COMPLETELY SOLD OUT.

It is with a mix of sadness and pride that I announce the end of production of the SA200 and the SA410. In spite of some of the most glowing reviews in the industry, sales have not been strong enough to continue production.

DOWNLOAD OWNER'S MANUAL

Designed for the discriminating bassist, the 200-watt SA200 took three years of design and testing to produce an integrated bass amplifier that sets a new benchmark for tone. At a time when the market is moving toward sacrificing sonic quality for light weight, lower cost and "bells and whistles", the SA200 is a return to quality and simplicity above all other concerns.The SA200 truly defines "plug and play."

Click to view back panel:

"Fired her up and she sounds FANTASTIC! Warm, pliant yet inwardly firm, and a GREAT bottom. All the things we look for, right? OK, enough with the feminine analogy. The thing I was initially struck by was the musicality. Really even sounding, I mean all the way up and down. And that's FLAT! Very intuitive tone control. Can't get in trouble ... you know what I mean. Plenty of REAL volume. All in all, so far, possibly the best amp I've heard in memory."

MICHAEL RHODES
(Nashville studio pro, currently playing with Vince Gill and Larry Carlton)

"This amp is a pure delight! I'm dialing in some absolutely wonderful sounds. With subtle turns of knobs I can get tones to change just as subtly, which is definitely not the case with most tube amps, believe me; tube amps usually require gross adjustments in order to yield minor changes. It's the sonic equivalent of a Creamcicle ... creamy, dreamy, and delicious. SA now stands for sensational amp!"

MICHAEL O'BRIEN
(Vintage tube bass amp collector)

"I don't recall sounding better ... I am honestly very impressed."

TOM BOWLUS
(Esteemed bass gear collector)

SPECIFICATIONS

Input:
Impedance: 1M
Pad: –6dB

Equalizer:
Bottom, Top: Active
Bass, Mid, Treble: Passive

Output:
210 Watts at 2, 4 or 8 Ohms

OHM CALCULATOR

Tubes:
6x EL34, 1x 6N1P, 2x 12AX7

Frequency Range (–3dB):
10Hz – 40 Khz

Lowest Full-Power Frequency (–1dB):
15Hz

Effects Loop:
Signal Level: –4 dBV
Send Impedance: 1K (buffered)
Return Impedance: 20K

Mains:
Input Voltage: 100, 115 or 230VAC 50/60Hz

Dimensions (without rack mount ears):
4U Rackmount
17 (W) x 7 (H) x 10 (D) in.
430 (W) x 176 (H) x 250 (D) mm

Weight:
42 lbs. (19 kg)